Boss tr2 volume pot
Inviato: 08/08/2008, 19:29
Ciao guys ho trovato sul sito queste mod al tr2 ...
The TR-2 is a pretty good pedal in its own right but with a bit of internal component
tweaking it sounds better than the "boutique trems" and is quieter, richer,
fuller than the stock pedal-definitely a keeper!
To sort the drop in volume issue replace resistor (R9 10K) for a 4.7K resistor or
better still install a 10K trim pot and tweak to the desired volume required.
To make the pedal have a more Hi Fi sound reduce noise remove
(C3, C5,C20,C21 1uf)electrolytic caps and replace with 1uf metallised film
capacitors/Mylar.
Also replace(C2 and C6 10uF) electrolytic caps for no polar.
To add high end sparkle remove completely (C7 10pF capacitor).Try it, if it is
not to your taste put the cap back in.
If you feel you would like to increase the rate lower the value of (R31 50K)
try say a 10K to start with.I personally left mine as stock value.
.... vorrei farle ma mi sorgeva un dubbio su quella del pot....quali pin del pot devo usare? gli estremi o quali??? se sbaglio mica faccio danni???
grazie.....magari se possibile con paint uno schemino
GRAZIE ANCORA
The TR-2 is a pretty good pedal in its own right but with a bit of internal component
tweaking it sounds better than the "boutique trems" and is quieter, richer,
fuller than the stock pedal-definitely a keeper!
To sort the drop in volume issue replace resistor (R9 10K) for a 4.7K resistor or
better still install a 10K trim pot and tweak to the desired volume required.
To make the pedal have a more Hi Fi sound reduce noise remove
(C3, C5,C20,C21 1uf)electrolytic caps and replace with 1uf metallised film
capacitors/Mylar.
Also replace(C2 and C6 10uF) electrolytic caps for no polar.
To add high end sparkle remove completely (C7 10pF capacitor).Try it, if it is
not to your taste put the cap back in.
If you feel you would like to increase the rate lower the value of (R31 50K)
try say a 10K to start with.I personally left mine as stock value.
.... vorrei farle ma mi sorgeva un dubbio su quella del pot....quali pin del pot devo usare? gli estremi o quali??? se sbaglio mica faccio danni???
grazie.....magari se possibile con paint uno schemino
GRAZIE ANCORA
Non vale neanche la pena che vi dica dove, basta provare un paio di volte... 